An effective and secure electrical testing device is the Fluke 1664FC Multifunction Tester (EVSE version). This device can read RCD/FI tripping current, earth resistance, potential earth fault current, True-RMS AC voltage, resistance, loop and line impedance, and tripping speed. With a sizable, simple-to-read LCD display and time-saving features like auto-testing for line impedance, RCD trigger tests, and insulation tests, convenience has been taken into account in the design of this tester. When used with an adaptor like the Fluke FEV300 (sold separately), the Fluke 1664FC enables testing of the DC protection devices at EV charging stations utilising the RCD type B (smooth DC Currents) VAR mode. This generator can test currents for RCD type A-EV or RDC-DD acc in accordance with IEC 62955 safety standards (6/60/200 mA and ramp 2 to 6 mA ramp). This enables quick and simple further testing of 6mA DC RCD monitors on charging points by the operator. The user interface of this device is a straightforward dial system, which avoids the frequently perplexing menu-driven interfaces of many multifunction devices. Z-Max memory for loop tests, which enables quick evaluation of the highest loop test value, is another feature that saves time. With its CAT III 500V overvoltage protection and Earth Volt Touchpad, the 1664FC also has some excellent safety features that can expose potentially harmful circumstances. This tester is compatible with Fluke's Fluke Connect technology, enabling users to stream test results to any Apple or Android mobile device by connecting via the Fluke Connect App. Additionally, the information may be added to and kept in the FlukeCloud database, making it accessible to team members and colleagues everywhere. A padded beck strap, test leads, a probe set, a remote probe, batteries, a mains cable, a calibration certificate, and a durable carry bag are all included with the 1664FC.
- measurement of AC voltage:-
Range:500 volts
1V as the resolution
Accuracy from 45 to 66 Hz: 0.8% + 3 counts
360kΩ input impedance
660V rms overload protection
RLO continuity testing
Range (autoranging): 20 cents, 200 cents, and 2000 cents
Resolutions of 0.01Ω, 0.1Ω, and 1Ω
Voltage of an open circuit: >
- 4V
General:-
Size: 10 x 25 x 12.5 cm (L x W x H).
Weight (batteries included): 1.3 kg
IP-40 Sealing
Cat III to 500V
- Cat IV to 300V of excess voltage
Safety: Meets with the demands of EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ISA -s82.02.01 2000, and CAN/CSA c22.2 No. 1010 2nd edition.
Performance: Second Editions of EN61557-1 to EN61557-7 and EN61557-10
6 x AA batteries
measuring insulation resistance:-
Test voltages: 50, 100, 250, 500, and 1000V
tTest voltage accuracy (at the specified test current): +10%, -0%
Ranges of insulation resistance: 20 to 50 MΩ, 20 to 100 MΩ, 20 to 200 MΩ, 20 to 200 MΩ, and 20 to 200 MΩ.
Resolution: 0.01MΩ / 0.1MΩ
- 0.01MΩ / 0.1MΩ
- 0.01MΩ / 0.1MΩ
- 0.01MΩ / 0.1MΩ / 1MΩ
- 0.01MΩ / 0.1MΩ / 1MΩ
Test currents of 1mA at 50kΩ
- 1mA at 100kΩ
- 1mA at 250kΩ
- 1mA at 500kΩ
- 1mA at 1MΩ
Impedance of loops and lines (ZI):-
High current mΩ mode
- range: 10Ω
- 0.001Ω
-
Resolutions of 0.01Ω, 0.1Ω, and 1Ω
PSC test for prospective earth fault current:-
1000A to 10kA (50kA) range
1A/0.1kA resolution
By dividing the actual mains voltage by the measured loop (L-PE) resistance or line (L-N) resistance, respectively, prospective earth fault current (PEFC) or prospective short current (PSC) are determined.
RCD testing and varieties of RCD testing:-
Type of RCD: A4, AC1, G2, S3
Notes: (1) Reacted to AC, (2) In general no delay, (3) Time delay, and (4) Reacted to pulsed signal
Measurement of RCD/FI-Tripping Current and Ramp Testing (IΔN):-
30% to 110% of the RCD-rated current is the current range.
10% of IΔN2 as a step size
Dwell time: Type G: 300 ms
- Type S: 500 ms
±5%5% accuracy in measurements
Trip current ranges that have been specified (EN 61008-1) are as follows: 50% to 100% for Type AC, 35% to 140% for Type A (>
- 10 mA), 35% to 200% for Type A (≤10 mA), 50% to 200% for Type B, and ²5% for Type B.
Notes: For Type A IΔN >
- 10 mA, ¹30% to 150%
- for Type A IΔN = 10 mA, 30% to 210%
- for Type B, 20% to 210%.
Testing the tripping speed (T):-
Current settings1: 10-30-100-300-500-1000mA - VAR
- 10-30-100mA
A multiplier of 0.5, 1, and 5
Measurement of AC voltage:-
Range:500 volts
1V as the resolution
Accuracy from 45 to 66 Hz: 0.8% + 3 counts
360kΩ input impedance
660V rms overload protection
RLO continuity testing
Range (autoranging): 20 cents, 200 cents, and 2000 cents
Resolutions of 0.01Ω, 0.1Ω, and 1Ω
Voltage of an open circuit: >
- 4V
Test for Earth Resistance (RE)
Range: 200Ω / 2000Ω
0.1 / 1 resolution
the frequency 128 Hz.
Voltage at output: 25V
Connect Fluke:-
Operating systems iOS 8 and later or Android 4.4 and later support Fluke Connect.
General:-
Size: 10 x 25 x 12.5 cm (L x W x H).
Weight (batteries included): 1.3 kg
IP-40 Sealing
Cat III to 500V
- Cat IV to 300V of excess voltage
Safety: Meets with the demands of EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ISA -s82.02.01 2000, and CAN/CSA c22.2 No. 1010 2nd edition.
Performance: Second Editions of EN61557-1 to EN61557-7 and EN61557-10
6 x AA batteries
Measuring insulation resistance:-
Test voltages: 50, 100, 250, 500, and 1000V
tTest voltage accuracy (at the specified test current): +10%, -0%
Ranges of insulation resistance: 20 to 50 MΩ, 20 to 100 MΩ, 20 to 200 MΩ, 20 to 200 MΩ, and 20 to 200 MΩ.
Resolution: 0.01MΩ / 0.1MΩ
- 0.01MΩ / 0.1MΩ
- 0.01MΩ / 0.1MΩ
- 0.01MΩ / 0.1MΩ / 1MΩ
- 0.01MΩ / 0.1MΩ / 1MΩ
Test currents of 1mA at 50kΩ
- 1mA at 100kΩ
- 1mA at 250kΩ
- 1mA at 500kΩ
- 1mA at 1MΩ
Impedance of loops and lines (ZI):-
High current mΩ mode
- range: 10Ω
- 0.001Ω
-
Resolutions of 0.01Ω, 0.1Ω, and 1Ω
PSC test for prospective earth fault current:-
1000A to 10kA (50kA) range
1A/0.1kA resolution
By dividing the actual mains voltage by the measured loop (L-PE) resistance or line (L-N) resistance, respectively, prospective earth fault current (PEFC) or prospective short current (PSC) are determined.
RCD testing and varieties of RCD testing:-
RCD type: G2, S3, AC1,
Model 1664: A, AC, B5, S
Notes: (1) Reacted to AC, (2) In general no delay, (3) Time delay, and (4) Reacted to pulsed signal
- (5) Responds to smooth DC signal.
Measurement of RCD/FI-Tripping Current and Ramp Testing (IΔN):-
30% to 110% of the RCD-rated current is the current range.
10% of IΔN2 as a step size
Dwell time: Type G: 300 ms
- Type S: 500 ms
±5%5% accuracy in measurements
Trip current ranges that have been specified (EN 61008-1) are as follows: 50% to 100% for Type AC, 35% to 140% for Type A (>
- 10 mA), 35% to 200% for Type A (≤10 mA), 50% to 200% for Type B, and ²5% for Type B.
Notes: For Type A IΔN >
- 10 mA, ¹30% to 150%
- for Type A IΔN = 10 mA, 30% to 210%
- for Type B, 20% to 210%.
Testing the tripping speed (T):-
Current settings1: 10-30-100-300-500-1000mA - VAR
- 10-30-100mA
A multiplier of 0.5, 1, and 5
Specifications for the Fluke 1663 Multifunction Tester
Measurement of AC voltage:-
500 volts Range
1V as the resolution
Precision from 45 to 66 Hz: 0.8% plus 3 counts
360 k input impedance
660V rms overload protection
RLO continuity testing:-
Range: 20 cents, 200 cents, and 2000 cents
Resolutions of 0.01, 0.1, and 1
Voltage of an open circuit: >
- 4V
Test for Earth Resistance (RE):-
Range: 200Ω / 2000Ω
0.1 / 1 resolution
the frequency 128 Hz.
General:-
Size: 10 x 25 x 12.5 cm (L x W x H).
Batteries: 6 x AA Weight (with batteries): 1.3 kg
IP-40 Sealing
Safety: Complies with EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ISA -s82.02.01 2000, and CAN/CSA c22.2 No. 1010 second edition regulations.
Cat III to 500V
- Cat IV to 300V of excess voltage
Performance: Second Editions of EN61557-1 through EN61557-7 and EN61557-10
Measuring Insulation Resistance:-
Test voltages: 50, 100, 250, 500, and 1000V
Test voltage accuracy (at the specified test current): +10%, -0%
Test voltage: 50, 100, 250, 500, and 1000 volts.
Ranges of insulation resistance: 20 to 50 M, 20 to 100 M, 20 to 200 M, 20 to 200 M, and 20 to 200 M.
Resolution: 0.01M/0.1M, 0.01M/0.1M, 0.01M/0.1M, 0.01M/0.1M/1M, and 0.01M/0.1M/1M
Test currents of 1 mA at 50 k, 100 k, 250 k, 500 k, and 1 mA at 1 m
Impedance of loops and lines (ZI):-
High current mΩ mode
- range: 10
- 0.001
-
Resolution of 0.01, 0.1, and 1
RCD testing and kinds of RCD testing:-
RCD type: G2, S3, AC1,
Model 1663: G2, S3, A4, AC1,
Reactions to AC, general no delay, time delay, and pulsed signal are noted.
Measurement of RCD/FI-Tripping Current and Ramp Testing (I-N):-
30% to 110% of the RCD-rated current is the current range.
10% of IN2 as a step size
Dwell time: Type G: 300 ms
- Type S: 500 ms
Measurement precision: 5%
Trip current ranges that have been specified (EN 61008-1) are as follows: 50% to 100% for Type AC, 35% to 140% for Type A (>
- 10 mA), 35% to 200% for Type A (10 mA), 50% to 200% for Type B, and 25% for Type B.
Notes: For Type A IN >
- 10 mA, 130% to 150%
- for Type A IN = 10 mA, 30% to 210%
- for Type B, 20% to 210%.
Test of tripping speed (T):-
Settings as of right now1: 10-30-100-300-500-1000mA - VAR
- 10-30-100mA
A multiplier of 0.5, 1, and 5
Range of measurements: 510ms, 160ms (RCD Type)
- 310ms, 50ms (RCD Type G).
Measurement of AC voltage:-
Range:500 volts
1V as the resolution
Accuracy from 45 to 66 Hz: 0.8% + 3 counts
360kΩ input impedance
660V rms overload protection
RLO continuity testing
Range (autoranging): 20 cents, 200 cents, and 2000 cents
Resolutions of 0.01Ω, 0.1Ω, and 1Ω
Voltage of an open circuit: >
- 4V
Test for Earth Resistance (RE)
Range: 200Ω / 2000Ω
0.1 / 1 resolution
the frequency 128 Hz.
Voltage at output: 25V
Connect Fluke:-
Operating systems iOS 8 and later or Android 4.4 and later support Fluke Connect.
General:-
Size: 10 x 25 x 12.5 cm (L x W x H).
Weight (batteries included): 1.3 kg
IP-40 Sealing
Cat III to 500V
- Cat IV to 300V of excess voltage
Safety: Meets with the demands of EN61010-1 Ed 2.0 (2001-02), UL61010, ANSI/ISA -s82.02.01 2000, and CAN/CSA c22.2 No. 1010 2nd edition.
Performance: Second Editions of EN61557-1 to EN61557-7 and EN61557-10
6 x AA batteries
Measuring insulation resistance:-
Test voltages: 50, 100, 250, 500, and 1000V
tTest voltage accuracy (at the specified test current): +10%, -0%
Ranges of insulation resistance: 20 to 50 MΩ, 20 to 100 MΩ, 20 to 200 MΩ, 20 to 200 MΩ, and 20 to 200 MΩ.
Resolution: 0.01MΩ / 0.1MΩ
- 0.01MΩ / 0.1MΩ
- 0.01MΩ / 0.1MΩ
- 0.01MΩ / 0.1MΩ / 1MΩ
- 0.01MΩ / 0.1MΩ / 1MΩ
Test currents of 1mA at 50kΩ
- 1mA at 100kΩ
- 1mA at 250kΩ
- 1mA at 500kΩ
- 1mA at 1MΩ
Impedance of loops and lines (ZI):-
High current mΩ mode
- range: 10Ω
- 0.001Ω
-
Resolutions of 0.01Ω, 0.1Ω, and 1Ω
PSC test for prospective earth fault current:-
1000A to 10kA (50kA) range
1A/0.1kA resolution
By dividing the actual mains voltage by the measured loop (L-PE) resistance or line (L-N) resistance, respectively, prospective earth fault current (PEFC) or prospective short current (PSC) are determined.
RCD testing and varieties of RCD testing:-
RCD type: G2, S3, AC1,
Model 1664: A, AC, B5, S
Notes: (1) Reacted to AC, (2) In general no delay, (3) Time delay, and (4) Reacted to pulsed signal
- (5) Responds to smooth DC signal.
Measurement of RCD/FI-Tripping Current and Ramp Testing (IΔN):-
30% to 110% of the RCD-rated current is the current range.
10% of IΔN2 as a step size
Dwell time: Type G: 300 ms
- Type S: 500 ms
±5%5% accuracy in measurements
Trip current ranges that have been specified (EN 61008-1) are as follows: 50% to 100% for Type AC, 35% to 140% for Type A (>
- 10 mA), 35% to 200% for Type A (≤10 mA), 50% to 200% for Type B, and ²5% for Type B.
Notes: For Type A IΔN >
- 10 mA, ¹30% to 150%
- for Type A IΔN = 10 mA, 30% to 210%
- for Type B, 20% to 210%.
Testing the tripping speed (T):-
Current settings1: 10-30-100-300-500-1000mA - VAR
- 10-30-100mA
A multiplier of 0.5, 1, and 5
Notes: Only type AC supports 1000mA, type A can only handle 700mA in VAR mode, and type B is not supported by VAR mode
- Testing RCD and loops on auto-start
Adjustable test kinds, ranges, and resolutions
500V for Cat III and 300V for Cat IV
A huge, bright LCD display
AC voltage, insulation resistance, loop and line impedance, prospective earth fault current, tripping speed, and RCD/FI current are all measured.
Phase sequence signal
supported with all required accessories
self-testing feature
testing for RCD triggers, the ramp test, and continuity
Using a wiring polarity checker, broken wires are tested.
Rating for Cat III overvoltage protection up to 500V/li>
- RCD testing, ramp testing, and continuity testing
High earth voltage is detected by Earth Volt Touchpad.
Connections between Fluke Connect and FlukeCloud
DC test voltages of 50V, 100V, 250V, 500V, and 1000V for insulation
Appliances are identified using Insulation PreTest to prevent damage.
A wide variety of impressive features are included, including a strap, test leads, calibration certificate, and carry case.
Unit of light weight: 1.3 kg
AC voltage, insulation resistance, loop impedance, and line impedance (ZI) measurements
measurement of the earth resistance, tripping speed, potential earth fault current, and current generated by the RCD/FI
To find damaged N wires, check the wiring'
- s polarity.
Calculates projected short (PSC/IK) and prospective earth fault current (PEFC/IK).
Contains Z-max memory for loop tests so you can quickly determine the highest loop test value.
loop and line resistance, as well as insulation resistance, are measured.
Test the continuity of the motor windings.
Test the ramp by measuring the RCD switching time and tripping level.
Trip time and current for RCD type A and AC are measured in one test.
RCD variable current is measured.
gives access to a special zero adaptor for quick, precise, and reliable test lead and main cord compensation.
provides an RCD test cycle that is automatic.
Phase-sequence signal
Rating for Cat III overvoltage protection up to 500V/li>
- RCD testing, ramp testing, and continuity testing
High earth voltage is detected by Earth Volt Touchpad.
Connections between Fluke Connect and FlukeCloud
DC test voltages of 50V, 100V, 250V, 500V, and 1000V for insulation
Appliances are identified using Insulation PreTest to prevent damage.
A wide variety of impressive features are included, including a strap, test leads, calibration certificate, and carry case.
Unit of light weight: 1.3 kg
AC voltage, insulation resistance, loop impedance, and line impedance (ZI) measurements
measurement of the earth resistance, tripping speed, potential earth fault current, and current generated by the RCD/FI
time-saving automatic test feature
