The mains voltage level may be checked and 28 socket wiring fault conditions can be found with the Martindale EZ365 Socket, Earth Loop, and RCD Tester. The EZ365 tests the earth wiring using an earth loop test and displays the value in six distinct ranges, ranging from less than 1.7Ω to 500Ω. Using a variety of red LEDs, the EZ365 detects earth wiring defects and socket polarity issues. The user may identify common defects with the help of the three LEDs, which stand for the neutral, earth, and live connections. In the event that a fault situation is detected, the EZ365 also sounds an audible alarm buzzer to notify users. The EZ365 is capable of trip testing 30mA RCDs and looking for L-NE polarity swapping at the incoming supply. Users may easily activate the L-NE cross polarity test by touching the touch pad on the front of the unit, which allows them to discover critical fault circumstances. According to the Health and Safety Executive, the EZ365 is a CAT II 300V advanced socket tester.
- 230 AC rms is the nominal operating voltage.
50 Hz is the operating frequency.
Power usage: less than 2.5 watts Power source: mains socket accuracy: ± (10% + 0.3Ω) Earth loop threshold Distributed extremely inductive or capacitive loads on the supply can compromise measurement accuracy.
Indicator of low voltage: <
- 195V ± 5%
Indicator of high voltage: >
- 270V ± 5%Hugh indication: >
- 30V nominal Earth neutral voltage Open earth indication: >
- 500Ω ± 10%
30mA is the RCD test current at 195V.
RCD test current duration: 300 ms
Test for polarity reversal: L-NE swapping at the inbound supply
Measurements: 60 x 80 x 59 mm
- approximate weight: 93 g
-10°C to 40°C with a maximum relative humidity of 60%
Elevation: Up to 2000 meters
Degree of pollution: 2.
Safety: Meets BS EN 61010-1, Class II, CAT II 300V, double insulation requirements.
EMC: BS EN 61326-1 compliant
- Testing for main socket polarity is quick and simple.
testing on Earth
indication of both high and low voltage
Six distinct ranges, ranging from 500Ω to less than 1.7Ω
Earth loop non-trip impedance
Sturdy construction for simple removal from a socket
Test of the incoming supply polarity swap
30mA RCD trip test audible indicator
