Megger RCDT330 Downloadable RCD Tester

Megger RCDT330 Downloadable RCD Tester

GBP £ 582.00

Manufacturer: Megger

On general and selective (time delayed) & programmed RCDs with ratings of 10 mA, 30 mA, 100 mA, 300 mA, 500 mA, and 1000 mA, the Megger RCDT330 tester can conduct 1/2I, 1xI, and 5xI tests. You can have an RCD tester for every situation if you combine this with the ability to download via USB up to 1000 test results using the included download manager software! The data on the RCDT330 is kept in non-volatile memory, so it is preserved even when the device is turned off or its batteries run out. Selecting a job reference number (up to 256) makes it possible to test several sites with the RCDT330 and to obtain the results separately. As a "Fuel Gauge," a memory bar graph displays the amount of memory that has been

  • Energy Source RCDT310 45 Hz to 65 Hz, 100 V to 280 V Eight IEC LR6 type, 1,5 V, alkaline AA batteries are used. Eight NiCd or NiMH cells at 1.2 V are rechargeable. Battery Life: 2000 tests conducted in a row Ranges of RCD Tests (to EN61557-6) Test Accuracy of Current Test for No Trip: (1/2I) -8% to -2% Trip Test: +2% to +8% (I, 5I) Travel Time: ±1% ±1 milliseconds Measurement of voltage (RCDT330, RCDT320, &amp
  • RCDT310) AC range: 25 Hz to 450 Hz, 0 V to 300 V Precision: ±2% ±2 figures Touch Fault Voltage Range shown: 0 V to 50 V Error: ±0.5 V, +5%/+15% Humidity and temperature Range of Operation: -5°C to +40°C Storage Range: -25°C to +70°C
  • Operating Humidity: 93% R.H. at +40°C max. Maximum elevation: two thousand meters IP54: Protection of the Environment These safety requirements are met by the Megger RCDT310: IEC61010-1 Cat III 300V phase to earth requirements. IEC61557 Conforms to the following sections of EN61557: Equipment for testing, measuring, or monitoring protective measures
  • Electrical safety in low voltage systems up to 1000 V ac and 1500 V dc. Section 1: General prerequisites Devices with residual current (Part 4) According to IEC61326-1, E.M.C. 980 grams in weight Measurements: 203 x 148 x 78 mm
  • tests programmable residual current devices (RCDs), DC RCDs, standard RCDs, and selected RCDs. Elevation testing Auto (Remote) Examination Three-phase security IP54 weatherproof Megger'
  • s three-year warranty certificate of Megger calibration Utilizing the USB interface, download and save test findings. permits testing with center-tapped 110 V supply. Durable rubber armored case with integrated cover accompanied by the free Megger Download Manager software