The Chauvin Arnoux CA8333 Qualistar+ is a multifunctional power quality analyser that helps identify energy losses and complex systems, allowing corrective action against incorrect power quality. It is easy to use, offers full diagnostics on electrical systems, and displays results on a full-color screen with an intuitive interface. Among its many features is the ability to perform a single test or measure over a period of time. The improvement from the Chauvin Arnoux CA8331, the CA8333 Qualistar+, comes with new features like an inrush mode on four periods and a transient mode (up to 50). It can record data for a few days to several weeks and has user-configurable alarms. A variety of Chauvin Arnoux clamps are compatible with the CA8333 Qualistar+ Power Analyser; however, for conducting current measurements, the manufacturer suggests using their MN93, MN93A, MA193, PAC93, A193-450, A193-800, C193, and E3N current clamps.
- Model numbers: CA 8331, CA 8333, CA 8336, CA 8435
Count of Channels3U/ 4I~4U/4I
The quantity of inputsVoltage (TRMS AC + DC): 4V/3I–5V/4IVoltage range: 2V to 1000V Ratio (TRMS AC+DC) up to 500kV Current
(Separately sold
- range dependent on clamp used)
MN93 clamps MN93A: 0.005A AC to 100A AC, 500mA to 200A AC
C193: 1A to 1000A AC Clamp
Clamps: AmpFLEX or MA193
- 100mA to 10000A ACAC 30A to 6500A
PAC931A to 1300A AC/DC
E3N50mA to 100A AC/DC
Present RatioAs much as 60kA
Hz to 69 Hz in frequency
W, VA, var, VAD, PF, DPF, cos φ, tan φ, and other power values
Energy PointsHarmonics: Wh, varh, VAh, VADhIndeed, THDYes, phase, orders 0 to 50
Expert Mode: Indeed
Temporary - 50 210 Flashlight
MIN/MAX recordingIndeed.
capturing a range of parameters at the highest possible sample rate From two weeks to four hours a few days to a few weekstwo weeks to a number of years
Four thousand alarms of ten distinct kinds10,000 of 40 distinct kinds
peakIndeed.
Vector-Based RepresentationAuto-Changing Color Display 320 x 240, diagonal 148 mm, 1/4 VGA TFT screen
- capture of screens and curves12 50
Electrical SecurityIP53 / IK08 / IP67 Languages
- IEC 61010 1000V, CAT III / 600V, CAT IV ProtectionOver 27 USB communication interfaces with a 13-hour battery life
9.6V NiMH rechargeable battery or an external mains charger is the power source.
Measurements270 x 250 x 180 mm / 240 x 180 x 55 mm / 1.9 kg / 3.7 kg
- Full power quality management system with automatic current sensor detection, simultaneous capture of all parameters, transients, alarms, and waveforms
Three current inputs and four voltage inputs
Measures harmonics, transients, power, frequency, flicker, inrush, and more.
presents information on a high-quality color screen.
Record as many as 12 screens and curves.
IEC 61010 safety ratings for CAT III 1000V and CAT IV 600V
Recording MIN/MAX
Suitability with a large variety of Chauvin Arnoux clamps
