Chauvin Arnoux PEL106 Power Energy Logger

The Chauvin Arnoux PEL106 Power Energy Logger is an incredibly well-made kit that can be installed on electricity poles and is appropriate for use with all kinds of electrical networks. The PEL 106 is equipped with four voltage and four current inputs, detects connected sensors automatically, and—most importantly—can be used without turning off the main power supply. With only 200ms separating measurements, this power logger records continuously, gathering all the necessary data for energy usage diagnostics. Five readings per second are possible, and all data is simultaneously recorded on every phase in accordance with IEEE 1459 standard. Due to the wide range of measurements, voltage up to 1,000 VAC/VDC and current up to 10 kVAC / 5 RMS and DC measurements on each phase at simultaneous rates of 128 samples/cycle, AC and/or DC voltages up to 1000 V, and current up to 10 kA AC or 5 kA DC (based on the current sensor) Energy values: total energy (4 quadrants) and up to 4 EWh, 4 EVAh, and 4 EVarh. Phase data: power factor (PF), tan Π, and cos φ Crest factor Harmonics for voltages and currents up to the fiftyth order measurements at DC, 50 Hz, 60 Hz, and 400 Hz The PEL106 and Chauvin Arnoux are dedicated to enhancing energy efficiency in cost-effective, environmentally friendly structures. In order to comply with current regulations, energy consumption must be optimized. Users can watch electrical distribution systems and carry out energy optimization initiatives by using a Power Energy Logger. A properly positioned PEL106 will rapidly identify areas that require maintenance and indicate the effectiveness of any remedies that have been used. These units, when connected to various electrical feeders, will determine the relative weight of each line in terms of total consumption, specify a load profile for the installation, and then rank the necessary upgrades in order of importance. Different Modes of Communication Even though an engineer is frequently not required to remain on-site for the duration of a measurement campaign, it is still crucial to make sure the PEL106 is operating as intended. Multiple connectivity options, including WiFi, 3G-UMTS/GPRS, LAN (Ethernet), Bluetooth, USB ports, and compatibility with Android applications, are included with every Chauvin Arnoux PEL106 unit. Users can connect remotely over a GSM 3G link by inserting a SIM card in the new 3G/GPRS mode. Real-time measurement monitoring is possible, and data recovery is possible from any location in the globe.