The DiLOG DL9130EV Advanced 18th Edition Multifunction Tester is specifically designed to support those electricians who offer EV charge point installation services. Amongst its features, the DL9130EV sports some new functionalities that are critical in ensuring safe EVSE installation including full 6mA pure DC test for RDC-DD verification, EV testing sequence for verifying DC protection and type A RCD protection. In addition, the newly introduced Rmax and Zmax features will automatically capture maximum values for R1+R2 continuity tests and Zs tests respectively and display them upon test completion. The addition of a colour RGB display, able to graphically highlight potential pass/fail circumstances, is another new feature in DiLOG's 18th Edition MFT line. The screen is fully illuminated and displays values using big, distinct numbers. Even when using a gloved hand, selecting an option or setting is simple thanks to the big function buttons and tactile rotary dial. This MFT can recognise whether users are performing a 2 wire or 3 wire loop/PSCC measurement without the requirement for mode selection thanks to an auto sensing intelligent high current 2 and 3 wire loop test. The auto start continuity test option offers extra automation for even greater user friendliness. Using test voltages of 250, 500, and 1000V, insulation can be measured. This MFT is the ideal instrument for EV installation testing since it provides exceptional value, a variety of cutting-edge features that are ready to use, and it enables the evaluation of each install's operational performance and safety in accordance with BS EN 61557 criteria.
- Quantity: 1360g
- Dimensions: 236 mm in width, 130 mm in depth, 91 mm in height
- Display Range (0.01Ω to 2000Ω) (200mA)
- Range of Measurement (200mA): 0.10Ω to 2000Ω
- Accuracy: 2% +/- 5 digits
- Resolutions are 0.01Ω to 19.99Ω, 20.0Ω to 199.9Ω, and 200Ω to 2000Ω
- Test voltage: open circuit >
- 4Vdc >
- 25Vdc
- >
- 200 mA test current
- Range of the display (15mA): 0.01 to 200
- Accuracy: 2% +/- 5 digits
- Resolution: 0.01Ω to 19.99Ω, 20.0Ω to 199.9Ω volts, >
- 4Vdc >
- 25Vdc Open Circuit/>
- 15mA
- IEC61557-4 and IEC61557-10 compliance
- Loop Impedance with High Current: Accuracy (to 20Ω): +/-5% +/-12 digits -5% and +5 digits (up to 2000Ω)
- Range of the display: 0.01Ω to 2000Ω
- Range of measurement: 0.10Ω to 1999Ω (high current)
- Resolution: 0.01Ω to 9.99 Ω, 10.0 Ω to 99.9 Ω, and 100 Ω to 2000 Ω
- Voltage supply: 195-253V, Hz: 45-65
- 3A RMS test current
- Line Impedance with High Current: Accuracy: +/-5% +/-5 digits
- Range of the display: 0.01Ω to 2000Ω
- Range of measurement: 0.10Ω to 2000Ω
- Resolution: 0.01Ω to 9.99 Ω, 10.0Ω to 99.9Ω, and 100Ω to 2000Ω
- Supply voltage: 328V to 480V and 195V to 253V
- 3A RMS Peak for the test current
- Insulation: IEC 61557-2 and IEC 61557-10 compliance
- Display range: 0.01Ω to 200Ω
- Range of display: 0.05 to 200 metres
- Insulation: +/-5% and +/-5 digits
- Resolutions of 0.1mΩ to 1.99mΩ, 2mΩ to 19.9mΩ, and 20mΩ to 200mΩ
- Testing voltage: 250, 500, and 1000V
- Test voltage range: 0% to 20% (open circuit)
- 1mA test current into UN (1000Ω/V)
- Alarm warning: <
- 1MΩ Screen &
- Audible
- Measurement of the loop test PFC: Accuracy: +/-5% +/-5 digits
- Range of the display: 0.1A to 26.0kA
- Resolution: 0.1A to 999.9A, and 1.0 to 26.0 kA
- PSC Measurement for a Line Test: Accuracy: +/-5% +/-5 digits
- Range from: 0.1A to 26.0kA
- Resolution: 0.1A to 999.9A, and 1.0 to 26.0 kA
- Loop Impedance with No Trip: Accuracy (to 20Ω): +/-5% +/-12 digits -5% and +5 digits (up to 2000Ω)
- Range of the display: 0.01Ω to 2000Ω
- Range of measurement: 1.00 to 1999 (non-trip)
- Resolution: 0.01 Hz to 9.99 Hz, 10.0 Hz to 99.9 Hz, and 100 Hz to 2000 Hz
- Voltage supply: 195-253V, Hz: 45-65
- <
- 15 mA RMS is the test current
- Trip Time RCD Test: IEC 61557-6 and IEC 61557-10 compliance
- Test current nominal values are 10mA/30mA/100mA (½ , 1, 5 I∆n), 300mA/500mA (½, 1 I∆n), and variable mode
- 10mA, 30mA, 100mA (½ , 1, 5 I∆n), 300mA, and 500mA ( ½, 1 I∆n) are the nominal test currents
- Voltages Supply: 195-253V, Hz: 45-65
- Test current accuracy: -0% +10% at I∆n and 5I∆n, -0% +10% at ½ I∆n
- Trip time ranges include 0 to 2000ms ½ I∆n, 300ms to 500ms In for general, and 0 to 40ms 5 I∆n In for selected
- Accuracy of the travel time: +/- 5% +/- 2 digits
- Test for variable RCD: 1mA to 500mA
- Test of RDC-DD Trip Time: 195-253V, 45Hz – 65Hz
- 6mA
- -0% +10%
- 0 to 10000 I∆n
- +/- 5% +/- 2 digits
- 2mA – 10mA
- IEC61557-6 and IEC61557-10
- Test for RDC (Ramp) Trip Current: Accuracy: +/- 5% of the estimated current
- IEC 61557-6 and IEC 61557-10 compliance
- between 0.5I∆n and 1.1I∆n
- Step Dimensions: 0.1*∆n
- 300 milliseconds each step
- Voltage: Range of the display: 0V to 480V
- Range of frequencies: 45.0Hz to 65.0HzV
- accuracy of the frequency: +/- 1.0Hz
- Range of measurement: 0V to 480V
- 1V Resolution
- Accuracy of voltage: +/- 5% +/- 2 digits
- No key features available.
