Fluke i310s AC/DC Current Clamp Probe

GBP £ 445.20

Manufacturer: Fluke

With a range of 30A to 300A AC and ±45A to 450A DC, the Fluke i310s AC/DC Current Clamp Probe measures AC and DC currents precisely and non-intrusively using Hall Effect technology. The Fluke i310s Current Clamp Probe uses a 19mm jaw clamp and can be used in tandem with other recording devices, such as multimeters and oscilloscopes that are compatible. Environmental conditions that cannot be avoided may have an impact on the output zero offset voltage; however, it may be readily reset using a straightforward dial interface. A 30 hour battery life complete with red warning LED, safety rating of CAT III 300V and a standard 4mm output jack makes the Fluke i310s a particularly practical current clamp probe. Fluke part number: 2842344

Maximum diameter of the conductor is 19 mm. Safety BNC connector is the output connection. accompanied by a 4mm safety adapter Output zero: Thumbwheel adjustment by hand Two meters is the length of the cable. Temperature range for operation: -10 to +50°C Temperature range for storage (without battery): -20 to +85°C 15% to 85% is the operating humidity (non-condensing). 250 grams in weight

Able to measure current between ±45A and 450A DC or 30A to 300A AC For use with digital multimeters and oscilloscopes To reset the output voltage to zero, use the Zero Adjustment. Non-invasive complex waveform current, DC, and AC measurement When the battery voltage is too low for regular functioning, an LED warning light appears. thirty hours of battery life Regular 4 mm CAT III 300V jack