The Teledyne FLIR TA74 Universal Current Probe Accessory is a very helpful way to increase the adaptability and range of your clamp meter, much like the smaller TA72. The 45cm flexible coil clamp of the TA74 is its unique feature. It can be threaded through tiny openings to access tight wire that a conventional hard-jaw clamp meter might not be able to reach. The accessory's extended clamp coil allows for more access and allows for the simultaneous measurement of many conductors. Additionally, the 3000A capacity of the probe will probably definitely increase the clamp meter's AC current measuring range. The measurement ranges available to the user include 30A, 300A, and 3000A, and the accuracy of the measurements is within 3%. The TA74 is compatible with most clamp meters due to its standard banana plug connectors and AC voltage output. The lightweight, ergonomic design of the probe and the typical FLIR build quality, which enable the TA74 to survive a 3 meter drop, are advantageous to the user. Because LED work lights can be used to illuminate poorly lit areas, the probe can therefore be used in challenging or hazardous working settings. An further layer of assurance is offered by the limited lifetime warranty.
- AC current maximum: 3000A
Resolution and ranges of AC current: 30.00A, 300.0A, 3000A
Accuracy of basic AC current: ±3% + 5 digits
1.5 samples per second measurement rate
- 45 Hz to 500 Hz nominal AC current bandwidth (sine wave)
Error in position: ±1% at 35 mm, 1.5% at 50 mm, and 2% at 60 mm
Meter Data
The bare minimum needed to be compatible is: Function for AC voltage, 4000 count display, 1mV remote*
Conductor diameter maximum: 12 cm
Length of flex coil: 45 cm
Diameter of flex coil: 7.5 mm
Diameter of the flex coil tip: 13 mm
Length of cable: 1.9 meters
Worklight: two LEDs in white
Energy source: two 2.5V AAA batteries
Drop test: three meters
Agency endorsements: UL, CE
Cat IV 600V and Cat III 1000V safety ratings
EN61010-1, EN61010-2-032, and EN61326-1 are the standards.
Limited lifetime warranty with registration
- The Teledyne FLIR TA74 Universal Current Probe Accessory is a very helpful way to increase the adaptability and range of your clamp meter, much like the smaller TA72. The 45cm flexible coil clamp of the TA74 is its unique feature. It can be threaded through tiny openings to access tight wire that a conventional hard-jaw clamp meter might not be able to reach. The accessory'
- s extended clamp coil allows for more access and allows for the simultaneous measurement of many conductors.
Additionally, the 3000A capacity of the probe will probably definitely increase the clamp meter'
- s AC current measuring range. The measurement ranges available to the user include 30A, 300A, and 3000A, and the accuracy of the measurements is within 3%. The TA74 is compatible with most clamp meters due to its standard banana plug connectors and AC voltage output.
The lightweight, ergonomic design of the probe and the typical FLIR build quality, which enable the TA74 to survive a 3 meter drop, are advantageous to the user. Because LED work lights can be used to illuminate poorly lit areas, the probe can therefore be used in challenging or hazardous working settings. An further layer of assurance is offered by the limited lifetime warranty.
