With a 52mm clamping diameter and a measuring range of 1A to 1,000A AC, the Chauvin Arnoux C193 Power Quality Clamp is the ideal addition to any Qualistar or PEL Power Quality Analyser. The C193 clamp is the perfect choice for use with any Chauvin Arnoux Power Quality Analyser, as it has a 600V CAT IV IEC 61010 rating.
- Having an Impact on Quantity: Reference Value
23 ± 3˚C is the temperature.
0 to 85% relative humidity
Signal frequency measurement range: 48 to 65 Hz
Signal type: Sinusoidal with no direct current component
None of the nearby current-carrying conductors
Position of conductor in jaws: central
Electric field outside: nonexistent
<
- 40A/m is the external DC magnetic field.
There is no external AC magnetic field.
Measurement device'
- s input impedance: <
- 5Ω
Overarching Specifications
Ratio of Transformation: 3,000 to 1
Quantification From 1 until 3,600 A.C.
Phase shift and intrinsic uncertainty: 1.5%R and 1.5˞ for 150A
- 0.75˞ and 0.75%R for 600A
For 3,000A, 0.5%R and 0.5˞
- for 3,600A, 0.5%R and 0.5˞
IEC 61869-2 accuracy class for the specified load is 0.5 (5V A).
Temperature influence: less than 0.1% per 10˚C
An neighboring current-carrying conductor'
- s influence: 0.005A / A
Conductor position influence: 1% + 0.1A
Yes (42 Vpeak) for protection against secondary (Umax in open circuit) opening.
Use time: permanent from 1 to 2,400 A
- 15 min to 30 min off from 2,400 to 2,800 A
- 10 min to 30 min off from 2,800 to 3,400 A
- and 5 min to 30 min off from 3,400 to 3,600 A
- Suitable for 2400A AC
ability to open its jaws to a maximum of 90 mm
- 3000:1 transformation ratio
robust construction and a firm grip
4 mm female plugs with surge protection
Standard has a 42 Vpeak voltage limiter.
300V CAT IV and 600V CAT III
12-month guarantee
P01120049A is the Chauvin Arnoux component number.
