The Extech PRT200 is a non-contact phase rotation tester that offers a quick and secure method of determining phase condition and sequence.
- Principle of Measurement: Induction of Static
Range of Frequency: 45 to 65 Hz
- Input Voltage: 75 to 1000 VAC
Maximum conductor diameter: 1.3"
- or 33 mm
Length of probe: 86 cm (34"
- )
5 minutes of auto-off without sequence detection
Low Power Source Note: The power LED flashes.
Four AA batteries at 1.5V
15mA of current consumption
-10°C to 50°C (14°F to 122°F) is the operating temperature and humidity range. Maximum relative humidity of 80%. Storage temperature: -4°F to 140°F (-20°C to 60°) Maximum 80% R.H.
Security: This meter is designed for use at the point of installation and is double-insulated in accordance with EN61010-1 to withstand Category IV 600V and Category III 1000V
- pollution degree 2.
Authorizations CE
- 45 to 65 Hz frequency range and 75 to 1000V AC input voltage
Vibrant LEDs show if a phase is rotating clockwise or counterclockwise and whether it is live.
Beeps periodically when the proper phase is detected and continually when the phase is inverted.
The device has a magnet on the rear for mounting to an AC distribution panel.
Wide-jawed, fully insulated alligator clips with movable LED brightness for taking measurements in bright or dark environments
Low battery alert
Rating for safety: CAT IV-600V
