Chauvin Arnoux CA6472 Earth and Resistivity Tester

A very advanced device, the Chauvin Arnoux CA6472 Earth and Resistivity Tester can detect ground potential, earth coupling, soil resistivity (Wenner and Schlumberger models), continuity/resistance (two-wire or four-wire), and earth coupling. The tester is compatible with a variety of measuring methods, such as two clamp earth loop measurement, four pole, three pole, and four pole selected. Ground voltage can be measured between 0.01mV and 65V, while the tester's resistance range varies based on the measurement method employed. The maximum range is 0.01Ω to 99.9kΩ. The user can verify the effectiveness of the earthing structure in the event that lightning strikes the system over a very wide frequency range (41Hz to 5078Hz). The Chauvin Arnoux CA6472 is the perfect tool for both seasoned users and novices, thanks to its two working modes. Tests may be initiated automatically by pressing a single button once they have been chosen using a straightforward rotary switch. When interference voltages are present, the tester will select the most suitable frequency instead of doing the default test at 128 Hz. The tester can reject interference voltage up to 60 volts, which helps with accuracy. The user may obtain extra readings to aid in interpretation and analysis in Expert mode, as well as choose certain measurement parameters (frequency, voltage, frequency scan, etc.). Color-coded terminals, simple operation, and a helpful information sheet within the tester's lid make it easier to set up the Chauvin Arnoux CA6472 for testing. The tester also has automated input recognition, which helps with accuracy and safety by warning the user if any adjustments are missing or wrong. The device's internal memory can hold up to 512 test results, which may then be uploaded to a PC using the included USB connector and the Chauvin Arnoux DataView programme, which aids in the analysis and decoding of the statistics. With its IP53-rated housing, the Chauvin Arnoux CA6472 helps keep its user safe in hazardous or loud conditions while also keeping it dry and secure for field work. Together with two C182 clamps, data export software, a USB cable, a mains converter, and a cable for charging the battery, it also comes with a 12-month manufacturer's guarantee. Measurement Adaptor for Pylon Earth Chauvin Arnoux CA6474:- The Chauvin Arnoux CA6472's remarkable feature is its capacity to conduct testing on pylons that include earth cables when used in conjunction with the Chauvin Arnoux CA6474 Adaptor for Pylon Earth Measurements. Because it enables lightning to safely discharge to earth without harming the high-voltage cable, earthing is a crucial component of pylon structure. With the use of this test feature, it is safer and quicker to test earth resistance without having to disconnect the earth connection from a pylon.Because of the CA6472's wide frequency range, the tester and adapter can precisely and selectively detect the earth impedance of the structure by mounting four current sensors on the pylon's feet. When the two devices are used in tandem, measurements may be obtained for the following parameters: the total earth resistance of the line, the resistance of the pylon that is being tested, the resistance of each foot of the pylon, and the resistance of the earth cable that runs between the pylons.