Martindale ET4500 Multifunction Tester

Martindale ET4500 Multifunction Tester

GBP £ 929.88

Manufacturer: Martindale

PRODUCT DESCRIPTION: Martindale ET4500 Multifunction Tester The improved version of the ET4000 is the Martindale ET4500. The ET4500 performs a three wire earth resistance test, has the ability to store and download test results, and performs tests to ensure that residential, commercial, and industrial electrical installations adhere to the standards outlined in BS7671:2008 (Amendment 3 of the 17th edition wiring regulations). The primary test options are programmed using a tried-and-true rotary dial on the Martindale ET4500's ergonomic design, while subsidiary test options are chosen by traversing a left, right, up, and down keypad menu. The Martindale ET4500 can also be set with additional test measurement criteria. This enables continuity, insulation resistance, and RCD tests to all use the same green and red LED indicators. Each test has a schematic help screen that may be accessed by clicking the 'help' key. This prompts a wiring diagram that shows the user how to attach the test probes to the circuit being tested. Continuous 8.5mA is used for inductive testing (motor windings and coils) and 200mA is used for R2 testing. 50V, 100V, 250V, 500V, and 1000V of insulation resistance line impedance (L-L or L-N), which also shows the PSC value Loop Impedance: L-CPC provides anti-trip checks for both high and low current. displays PFC value as well. Auto RCD and Ramp Test on 10, 30, 100, 300, 500, and 1000mA RCDs, phase rotation, frequency, and TRMS voltage, Three Wire Earth Resistance Test (needs extra equipment for testing the earth's resistance). The loop imdeance data will be automatically analysed by the Martindale ET4500, and they will be compared to the values given in Amendment 3 of the IET BS7671:2008 wiring rules, 17th edition. those that are in compliance will be shown with a green "pass" LED, while those that are out of compliance will be shown with a red "fail" LED.

  • On connection, polarity and wiring are checked automatically. Auto RCD and ramp testing with a single screen showing all results Third Amendment-compliant new Zs loop impedance tables and assistance screens included in LED red and green indicators show results instantly. In all models, TRMS voltage measurements and phase rotation No need to unpack and repack with the Test and Go soft travel case. Testing non-trip loops at high currents quickly and effectively Tests for three wire earth resistance and low discharge rechargeable batteries For recording findings, on-board storage and download is available. ET4500:- 10/30/100/300/500/1000mA Auto RCD and Ramp Test (AC, A, F, S) Continuous Tests at 200mA and 8.5mA Insulation Resistance for Voltages of 50, 100, 250, 500, and 1000 For many readings and assistance, use graphics Loop Resistance and PFC dual display with in-car option, mains rechargeable For recording results, use memory and download. Remote-starting slimline probe Voltage, frequency, and phase order of TRMS Testing the three-wire earth resistance CAT IV safety rating for 300V and CAT III for 600V ET4000:- 10/30/100/300/500/1000mA Auto RCD and Ramp Test (AC, A, F, S) Continuous Tests at 200mA and 8.5mA Insulation Resistance for Voltages of 50, 100, 250, 500, and 1000 For many readings and assistance, use graphics Loop Resistance and PFC dual display Remote-starting slimline probe Voltage, frequency, and phase order of TRMS CAT IV safety rating for 300V and CAT III for 600V
  • Impedance tables and help screens for the new third amendment Zs loop are built-in. appropriate for residential, commercial, and industrial electrical setups Test for Three-Wire Earth Resistance