Fluke 2042 Cable Locator

Fluke 2042 Cable Locator

GBP £ 766.80

Manufacturer: Fluke

For tracing and identifying metallic piping and cabling in walls, beneath plasterboard, and underground up to a maximum depth of 2.5 meters, the two-part Fluke 2042 Cable Locator is a helpful tool. The 2042 has a number of benefits over standard cable locators, including the ability to locate fuses and trace conductors in soil, as well as work on both live and dead cables without the need for further equipment. In addition, it has the ability to identify conductor defects and short circuits. To ensure that the user has located the correct cable, the signal code is shown as a letter on both the transmitter and the receiver. The receiver's wide LCD screen shows this transmission code, the strength of the received signal, the external voltage, and clear auditory feedback. Although an acoustical receiving signal is an option for the user, the signal is standardly digital. The Fluke 2042 is also particularly adaptable because the sensitivity to the receiving signal can be changed manually or automatically. Both the transmitter and the receiver are lightweight and portable, and an inbuilt torch makes it easier to work in dimly lit areas. The user is equipped with everything needed for thorough, quick cable location and tracing, including two sets of test leads, crocodile clips, and probing tips, all of which are included in a protective carry case.

  • Technical Details Transmitter voltage measurement range: 12V, 50V, 120V, 230V, 400V The transmitter&#039
  • s frequency range is 0...60 Hz. Transmitter output signal: 125 kHz Transmitter voltage: up to 400V AC/DC Locating the receiver for tracing depth cables: 0...2.5 m for wall/underground cables Receiver&#039
  • s primary voltage detection: 0...0.4 m Environmental Details Range of operation: 0˚ to 40˚C Cold storage (-20°C to +60°C) Maximum relative humidity (without condensation): 80% Operationally, up to 2,000 meters Safety Requirements EN61010-1 electrical safety Category for overvoltage: Cat. III 300V Overarching Specifications Dimensions of the transmitter: 190 x 85 x 50 mm Dimensions of the receiver: 250 x 65 x 45 mm Weight of transmitter: 0.45 kg Weight of receiver: 0.36 kg Six 1.5V transceiver batteries One 9V receiver battery
  • Sender and recipient Comprehensive, in-screen data Ideal for locating cables and tracking metallic pipes signal with digital coding for increased precision Included are test leads, probes, and clips. Included hard carry case
  • compliant with EN61010-1 Vat III 300V
  • built-in torch