Part number KT66DL for Kewtech The Kewtech KT66DL 12-in-1 Multifunction Tester offers a full array of functions essential to the everyday contractor and is constructed for optimal dependability and usability. The ultimate tester, the KT66DL, incorporates a cutting-edge loop testing system with choices for testing low current on both 2 and 3 wires as well as Anti-Trip technology (ATT) for no trip testing on all RCDs.The 2-wire option is particularly helpful in situations when there is no neutral wire, such as in 3-phase motor lines or when checking lighting circuits at switch points. In addition to Loop testing, the famous KT66DL offers a comprehensive RCD testing facility that can now test EV charging stations when utilised with the Kewtech KEWEVSE adaptor. These characteristics work together to produce an MFT with a level of performance and accuracy that has never been seen before.
- The Kewtech KT66DL is a highly adaptable tool with a wide range of testing operations that is specifically built for residential, commercial, and industrial installations:
CONTINUITY:-
20/200/2000 Ω range
200mA / 15 mA
a programmable buzzer
Default null
Earth RESISTANCE:-
3 wire
2 wire
Alert for live circuits
Hi , Current Loop:-
25 A 0.001 range
6A 0.01 range
Systems between 55 and 500 volts
test lead auto-null
THE INSULATION:-
100/250/500/1000V
Bar chart
DAR / PI
A full discharge signal
Current Loop Lo:-
three wires, 0.1 range
range of 2 wire 0.01
2 X EV 3 wire ranges at 0.01
Maximum Z-tables
PSC:-
2000A / 20 kA
Dual PSC/PFC display
Display of voltage and Hz
PFC:-
2000A / 50 kA
Dual PSC/PFC display
Display of voltage and Hz
PAT:-
Continuity
Insulation
Download
SECTION ROTATION:-
definite sign
voltage L1-L2, L2-L3, L3-L1,
Frequency
VOLTS:-
TRMS 2 - 600V
L-N, L-PE, and N-N
Frequency
SPD:-
range of 1000 V
Bar chart
Result of AC &
- DC breakdown
RCD:-
AC, ACS, A, AS, and F
Type B, EV, and 6mA EVSE
UC value and RDCD Auto/Manual choices
Below are all of the details of the Kewtech KT66DL 12-in-1 MFT.
Excellent Design:-
A single rotary dial, four tactile function softkeys, and a 3.5-inch LCD dot matrix display make up the KT66DL MFT'
- s simple user interface. By displaying information concurrently, this screen allows the operator to access all auto-tests without having to switch between different menus.The KT66DL supports three different testing techniques: a single button press, a lockdown test button for continuous testing, and an alternative test button found in an auxiliary probe. Test results should be labelled with the test kind, circuit number, and database for storing in this MFT'
- s advanced memory. Additionally, the unit has a helpful help feature that explains in detail how to connect the instrument to the desired function.This Kewtech model comes with the incredibly popular G7 test leads, a sturdy soft carry bag, a printed manual, and a certificate of end-of-line calibration in addition to a lid for added protection. The KT66DL is entirely compliant with the most recent IEC safety regulations and is rated CAT IV 300V and CAT III 600V.
EV Charging Point Adapter, Kewtech KEWEVSE:-
Access a variety of extra testing features by combining the Kewtech KT66DL 12-in-1 Multifunction Tester with the little Kewtech KEWEVSE Adapter. The operator can run a 6mA DC RCD test, simulate the presence of an electric car, and much more with this EV Charging Point adaptor connected to the KT66DL.
- Automatic loop evaluation is made possible by built-in loop impedance tables.
An excellent choice for testing TT and TN systems
Circuit testing time is decreased by automated RCD testing
Loop evaluation is automated by the built-in loop impedance tables.
suitable for testing single- and three-phase installation
Schematic assistance displays for on-site use and convenience
real-time monitoring of all three voltages
rechargeable batteries built-in with the charger
Reversing polarity automatically during a continuity test
Trip Lock to stop tripping of RCDs and RCBOs
Application of anti-trip loop technology with RCDs of 30 mA and greater.
Without the need to scroll, all results are displayed at once.
In compliance with BS7671 rules
Display PFC &
- PSC along with loop readings at the same time.
PFC and PSC measurements are simple and don'
- t require changing test probes.
Additional four function buttons
Internal memory for compensating test lead resistance
rated IP54
a huge colour backlit screen
Blowing fuses or PCBs is prevented by live monitoring.
Test of Phase Rotation
RCD evaluates AC/A and ACS/AS
RCD ratings 10, 30, 100, 300, 500, and 1000mA, and RCDs are tested automatically at 30mA
DNO Mains Special Polarity Test
a single, tactile dial with clear labels.
Auto-null test leads for continuity
There are three ways to begin a test: pressing a button, using hands free, or using the probe.
For outcomes without noise interference or RCD uplift, use the anti-trip testing.
18th Edition Multifunction Tester with 6 in 1 Functions
Full no trip loop testing using anti-trip technology for all RCD types
Extra LED for high voltage output warning in insulation test mode
Test lead resistance is eliminated by auto null for precise continuity test values.
RCD testing automated, with all outcomes displayed on a one screen without scrolling
LED backlighting
checks the phase-to-phase loop
17th Edition Multifunction Tester that is simple to use
Includes end-of-line calibration certificate
Download Lead and Kew Report Software
Phase rotation test in accordance with the standards for testing in the current 17th Edition
Measurement of PFC &
- PSC separately without changing test probes
For "
- hands-free"
- testing, there is a test button in the probe and a lockdown test button.
touch voltage selection
Insulation testing with auto discharge at 250, 500, and 1000 volts
Calculates projected short (PSC/IK) and prospective earth fault current (PEFC/IK).
Contains Z-max memory for loop tests so you can quickly determine the highest loop test value.
loop and line resistance, as well as insulation resistance, are measured.
Test the continuity of the motor windings.
Test the ramp by measuring the RCD switching time and tripping level.
Trip time and current for RCD type A and AC are measured in one test.
RCD variable current is measured.
gives access to a special zero adaptor for quick, precise, and reliable test lead and main cord compensation.
provides an RCD test cycle that is automatic.
Phase-sequence signal
RCD testing, ramp testing, and continuity testing
500V for Cat III and 300V for Cat IV Security rankings
Ground Volt Touchpad recognises elevated earth voltage
Smartphone connectivity for Fluke Connect and FlukeCloud
Insulation PreTest recognises appliances to prevent harm.
DC test voltages of 50V, 100V, 250V, 500V, and 1000V for insulation
AC voltage, insulation resistance, loop impedance, and line impedance (ZI) measurements
measurement of the earth resistance, tripping speed, potential earth fault current, and current generated by the RCD/FI
includes all required add-ons, such as a remote probe and an FTP fused test probe set.
time-saving automatic test feature
strong construction and lightweight portability
