The Fluke 1587 FC is a novel combination of a multifunctional, handheld digital multimeter and an accurate digital insulation tester. With the wide range of test voltages (50 to 1000V) available on the 1587 FC, insulation resistance can be measured between 0.01MΩ and 2GΩ. The device offers the user choices for measuring AC/DC voltage, AC/DC current, resistance, diode test, continuity test, frequency, capacitance, and temperature among other multimeter functions. High levels of accuracy are measured over wide ranges, and additional precision and versatility are provided by range and resolution options. Accuracy in measuring AC voltage and current is enhanced by true RMS measurement, and the Fluke 1587 FC incorporates a VFD low-pass filter to facilitate precise motor drive measurements. The measurement options of the Fluke 1587 FC are enhanced by more advanced features. The device's most notable feature is its ability to connect to the Fluke Connect App, which enables the user to view readings on a smartphone. With the help of the app, PI/DAR timed ratio tests—which utilize TrendIt graphs—can identify issues with moisture and contaminated insulation more rapidly. The app offers temperature compensation, and it also allows you to track asset trends in the past and digitally upload readings to a shared database. Another crucial feature of the Fluke 1587 FC is safety. When voltages higher than 30V are detected, a voltage detector stops insulation testing and automatically discharges the capacitive voltage to protect the user. The device has a Cat rating. All the accessories required for electrical troubleshooting and insulation testing, such as a Type-K thermocouple, crocodile clips, test leads, remote probe, hard case, and instruction manuals, are included with the Fluke 1587 FC. Fluke Connect App With the free Fluke Connect App, users can upload results from Fluke smart devices to the FlukeCloud database instantaneously. The app is available for both Android and iOS smartphones and tablets. Colleagues can check and analyze data even when they are not on site thanks to this app, which gives them access to a handy and intelligent database from anywhere in the world.
- AC voltage measurement (Range / Resolution / Accuracy 50 to 60Hz / Accuracy 60 to 5000Hz)
±(1% + 3) / 600.0 mV / 0.1 mV / ±(2% + 3)
A.V. / 0.001V / ±(1% + 3) / ±(2% + 3)
0.01V / ±(1% + 3) = 60.00V / ±(2% + 3)
Ⱡ(1% + 3) / 0.1V / 600.0V / ±(2% + 3)
(2% + 3) / ±(1000V / 1V) / ±(2% + 3)
Low-Pass Filter Voltage (Range / Resolution / Accuracy 50 to 60Hz / Accuracy 60 to 400Hz
600.0 volts / 0.1 volts / ±(1% + 3) / +(2% + 3), -(6% - 3)
0.001V / ±(1% + 3) / +(2% + 3), -(6% - 3) 6.000V
-(6% - 3) / 60.00V / 0.01V / ±(1% + 3) / +(2% + 3),
600.0 V/0.1 V / ±(1% + 3) / +(2% + 3), -(6% - 3)
-(6% - 3) / 1000V / 1V / ±(2% + 3) / +(2% + 3)
DC Voltage Measurement (Range / Resolution / Accuracy
6.000 volts per volt or ±(0.09% + 2)
0.09% + 2 / ± 60.00V / 0.01V
/ 0.1V / ±(0.09% + 2) = 600.0V
±(0.09% + 2) / 1000V / 1V
10MΩ nominal input impedance, less than 100pF
<
- 60dB @ 50Hz is the normal mode rejection ratio.
<
- 120dB is the common mode rejection ratio at 50 Hz or 60 Hz (1 k unbalance).
DC Voltage Millivolt Measurement (Range / Resolution / Accuracy
600.0mV / 0.1mV / ±(0.01% + 1)
AC Current Measurement (45Hz to 1000Hz) (Range / Resolution / Accuracy / Burden Voltage
±(1.5% + 2) / 400mA / 0.1mA60 mA / 0.01 mA / ±(1.5% + 2) / 1 / 2 mV/mA
DC Current Measurement (Range / Resolution . Accuracy Burden Voltage
±(0.2% + 2) / 400 mA / 0.1 mA / 2 mv/mA
ñ(0.2% + 2) / 60 mA / 0.01 mA / 2 mV/mA
Overload: 600 mA for no more than two minutes
For mA input, the fuse protection is 0.44mA, 1000V, IR 10kA.
AC conversion: The 11 kHz bandwidth inputs are AC-coupled and calibrated to the sine wave input'
- s RMS value.
Resistance measurement (Range / Resolution / Accuracy
600.0Ω /±(0.9% + 2)· / 0.1Ω
6.000kΩ/±(0.9% + 2) / 0.001kΩ
0.01kΩ / ±(0.9% + 2) = 60.00kΩ
0.1kΩ / 600.0kΩ / ±(0.9% + 2)
Six Thousand MΩ / 0.001 MΩ / ±(0.9% + 2)
±(1.5% + 3) / 50.0MΩ2 / 0.01MΩ
Protection against overload: 1000V DC or RMS
Minimum open circuit voltage (DC) of 8.0V, minimum short circuit current of 1.1mA
1 The accuracy ranges from 0% to 100%.
2As much as 80% RH
Diode Test
Display voltage drop of 0.6V at nominal test current of 1mA is the diode test indication. Accuracy: ±(2% + 3)
Continuity Test
Constant buzzer for resistance below 25Ω and off for resistance above 100Ω (maximum reading = 1000Ω) indicates continuity.
8.0V is the open circuit voltage.
Current on short circuit: 1.0 mA Typical 1000V RMS overload protection
Time of response: greater than one millisecond
Frequency Measurement (Range / Resolution / Accuracy
0.01 Hz / ±(0.1% + 1) = 99.99 Hz
(0.1% + 1) / 0.1Hz / 999.9Hz
0.001kHz / 9.999kHz / ±(0.1% + 1)
0.01 kHz / 99.99 kHz / ±(0.1% + 1)
Frequency Counter Sensitivity (Voltage / V AC sensitivity (RMS Sine Wave)1 5Hz to 100kHz / DC trigger levels1 to 20kHz2
100 mV, 150 mV, 600 mV AC, and n/a
60V, 10V, 36V, 1.2V, and 4.0V
- 6V, 1V, 1.5V, -400.0mV, and 2.5V
12V, 40V, 100V, n/a, and 600V
12V, 40V, n/a, 300V, and 1000V
For a given accuracy, enter 1 mA plus 10 x range (maximum 1000 V). Accuracy may be impacted by low frequency and amplitude noise.
2Usable with full scale input up to 100 kHz
Capacitance Measurement (Range / Resolution / Accuracy
±(1.2% + 2) / 1000nF / 1nF
0.01µF / ±(1.2% + 2) = 10.00µF
12.1 percent ± 90 counts = 100.0µF / 0.1µF / ±
1µF / ±(1.2% ± 90 counts) = 9999µF
Temperature Measurement (Range / Resolution / Accuracy)
-40°C to 537°C / 0.1°C / ±(1% + 10)
1Accuracies apply following 90 minutes settling time after a change in the ambient temperature of the instrument
Insulation Specifications
Range of measurement: 0.01MΩ to 2GΩ
Test voltages: 1000, 1000V, 500V, 250V, and 100V
Accuracy of test voltage: +20%, -0%
Test current for short circuits: nominally 1 mA
Auto discharge: Duration of discharge
Live circuit detection: Before the test is started, stop it if the terminal voltage is higher than 30 volts.
Maximum load capacity: able to function at up to 1µF load
Output Voltage (Test Voltage / Display Range / Resolution / Test Current 1 / Accuracy 1 / Display Range 2 / Resolution 2 / Test Current 2 / Accuracy 2 / Display Range 3 / Resolution 3 / Test Current 3 / Accuracy 3)
50V (0%–20%), 0.01–6MΩ, 0.01MΩ, 1mA @ 50kΩ, ±(3% + 5) and 6–50MΩ, 0.1MΩ, 1mA @ 50kΩ, ±(3% + 5) / - / - / - / 0.01 to 6MΩ / 0.01MΩ / 1mA @ 100kΩ / ±(3% + 5) / 6 to 60MΩ / 0.1MΩ / 1mA @ 100kΩ / ±(3% + 5) 250V (0% to +20%) / 60 to 100MΩ / 1MΩ / 1mA @ 250kΩ / ±(1.5% + 5) / 0.1 to 60MΩ / 0.1MΩ / 1mA @ 250kΩ / ±(1.5% + 5) / 60 to 250MΩ / 1MΩ / 1mA @ 250kΩ / ±(1.5% + 5) / - / - / - / - 500V (0% to +20%) / 0.1 to 60MΩ / 0.1MΩ / 1mA @ 500kΩ / ±(1.5% + 5) / 60 to 500MΩ / 1MΩ / 1mA @ 500kΩ / ±(1.5% + 5) / - / - / - / - 1000V (0% to +20%) / 0.1 to 60MΩ / 0.1MΩ / 1mA @ 1MΩ / ±(1.5% + 5) / 60 to 600MΩ / 1MΩ / 1mA @ 1MΩ / ±(1.5% + 5) / 0.6 to 2.0GΩ / 100MΩ / 1mA @ 1MΩ / ±(10% + 3)
General
Maximum voltage of 1000V
Cold storage (-40°C to 60°C)
Comfort range for operation: -20°C to 55°C
Temperature coefficient: for temperatures below 18 °C or above 28 °C, 0.05 x (with specified accuracy) per °C
0% to 95% at 10 °C to 30 °C
- 0% to 75% at 30 °C to 40 °C
- and 0% to 40% at 40 °C to 55 °C are the relative humidity of non-condensing materials.
Random, 2g, 5-500Hz per MIL-PRF-28800F, Class 2 vibration
2.4 GHz ISM Band radio frequency communication
Radio frequency certification: IEC 61010-2-033: Cat IV 600V / Cat III 1000V
- FCC: T68-FBLE
- IC: 6627A-FBLE
- IEC 61010-1: Pollution degree 2
Four AA batteries (NEDA 15A or IEC LR6) are needed.
1000 hours of battery life
Dimensions: 10 x 100 x 203 mm (H x W x L).
550g in weight
Operating altitude: 2000 m
- storage altitude: 12000 m
Capacity for over-range: 11% of
- Testing of insulation from 0.01MΩ to 2GΩ and measurement of AC/DC voltage (0 to 1000V)
Measurement of AC/DC current (0 to 400mA)
Readings in milliampers and millivolts
Temperature, frequency, capacitance, and diode/continuity test
A real RMS measurement
Low-pass filter for VFDs
Using the Fluke Connect App, advanced analysis and more
Examine the outcomes on a smartphone.
For safety, there is capacitance auto-discharge and voltage detection.
complete with all required add-ons
