The Chauvin Arnoux CA6522 Insulation Tester is perfect for conducting insulation maintenance on industrial insulation because it measures insulation resistance from 0 to 40GΩ and has test voltages of 250V, 500V, and 1000V to provide good flexibility when taking insulation resistance measurements. Moreover, the ability to test insulation for predetermined periods of time eliminates the distortion caused by transient current. To further ensure user safety, it can also measure voltage up to 700V and conduct continuity and voltage absence tests. The backlit digital display, which has an analog bar graph and a data hold feature, shows the results. An audible alert is included in the continuity test function of the Chauvin Arnoux CA6522, which is controlled by a straightforward dial. Test leads, a carry case, and crocodile are among the accessories provided.
- Voltage
Resolution / Measurement range: 0.3 V to 399.9 V / 0,1 V
- 400 V to 700 V / 1 V
Accuracy / Input impedance: 400 kΩ / ± (3 % + 2 cts)
DC
- 15.3–800 Hz is the operating frequency.
Insulation
Test voltage range: 250–500–1000 V
Maximum test voltage range: 40 G
Respect for the IEC 61557-2 standard: Two G
Range of measurement (250V): 50 kΩ - 10 GΩ
Measurement range: 100 kΩ to 20 GΩ (500V).
Range of measurement (1,000V): 200 kΩ to 40 GΩ
10 - 999 kΩ and 1.000-3.999 MΩ / 1 kΩ
- 4.00 - 39.99 MΩ / 10 kΩ
- 40.0-399.9 MΩ / 100 kΩ
- 400 - 3,999 MΩ / 1 MΩ
- 4.00 - 39.99 GΩ / 10 MΩ
- 40.0 - 200 GΩ / 100 MΩ are the measurement range and resolution.
± (3 % + 2 cts)(2) ± (3 % + 2 cts)(3) is the accuracy.
Test voltage: -0% + 20% (I <
- 1 mA)
Test voltage display: ± (3 % + 3 cts)
Timer (minutes: seconds): 0 - 39:59
Discharge time: less than 2 s/µF at 25V
Continuity
The measurement range for continuity is 0.00 Ω–10.00 Ω (200 mA).
Precision / Voltage of the open circuit: ± (2 % + 2 cts) / ≥ 6 V
Current measurement: 20 mA range: 20 mA ± 5 mA
- 200 mA range: 200 mA (-0 mA + 20 mA).
The two-second fixed continuity thresholds (quick beep)
Cable compensation: up to 9.99 Ω
General specifications
Display: logarithmic bargraph plus two x 4,000 cts
Power supply/autonomous shutdown: six LR6 (AA) batteries /deactivatable, five minutes
3,000 continuity measurements (5 s ON / 55 s OFF)
- 1,500/2,500/6,000 measurements (4): UN x 1 kΩ @ UN
Dimensions: 211 x 108 x 60 mm / 850 g / IP 54 / IK 04
- weight
- dimensions (h x w x d)
-
IEC 61326-1, IEC 61010-1, and IEC 61010-2-030, 600 V CAT IV, EMC and electrical safety
Standards compliance: IEC 61557 parts 1, 2, 4, and 10
Two-year warranty
- Measurement of resistance: 40GΩ
Test voltages: 500, 1000, and 250 volts
Test for absence of voltage
Measurement of voltage: 700V
Timed tests with programming
200mA continuity test featuring a sound alert
Digital screen paired with an analog bar graph
Cat IV 600V
a 2-year guarantee
