Socket & See PDL PRO High Resolution Loop Tester

GBP £ 310.80

Manufacturer: socket & see

For high current, high resolution digital earth loop impedance testing, the Socket & See PDL PRO High Resolution Loop Tester is the perfect tool. With the aid of loop anti trip technology, the following tests can be dependably assigned to it: Loop L-E without a trip: Analyze the Zs value of the system loop impedance in an RCD protected circuit. Disconnect any unnecessary electrical appliances to prevent the RCD from tripping due to leaks build-up during this 3-wire test. Elevated Current L-E: Examine the distribution board's external loop impedance (Ze), which is located downstream of any integrated RCDs. Moreover, system loop impedance (Z) can be measured by this test in a circuit that is not RCD protected. High Current, High Resolution L-E / L-N: These tests can be performed to assess the external loop impedance (Ze) and system loop impedance (Zs) in a circuit that is totally free of RCD. The outcomes will be shown at a resolution of 1MΩ. When measuring Prospective Fault Current (PFC), the PDL PRO uses the true impedance technique to provide reliable findings. In the event that there is a disruption between the live conductors, PSC is also calculated by the PDL PRO. The Hands Free capability included with the PDL PRO can be used to complete all loop tests. The test will start on its own as soon as the instrument is attached and the proper voltage and polarity are verified. The PDL PRO has a sizable backlit display that shows results both when it is turned on and when it is in use. By choosing the VOLTS LN-LE-NE function, you can change the voltage that is displayed. The battery life is maintained with a 3-minute auto-off feature, and the rubberized housing provides great defense against normal wear and tear. With an ergonomic design, the user-friendly interface has multiple buttons that are easy to use and a single tactile dial. In addition, the PDL PRO features a polarity test pad with an audible and visual warning, total protection against inadvertent phase-to-phase connections,

Electrical Specifications Accuracy of Voltage Range: 0 to 260 V&lt
±(3% + 3 digits) No Trip L-E Loop Test (three wire testing, phase, neutral, and earth linked, no trip L-E mode) Ranging from 0.00 to 99.99Ω~± (5% + 5 digits) in accuracy Between 100.0 and 499.9± (3% + 3 digits) High I L-E Loop Test (three wire testing, phase-neutral-earth linked, High I L-E mode) Between 0.000 and 9.999Ω~± (3% + 30 mΩ) Between 10.00 and 99.99Ω± (3% + 3 digits) Between 100.0 and 500.0Ω~± (3% + 30 mΩ) Overarching Specifications Energy SourceThe four AA LR6 batteries. 50 Hours of Battery Life Category CAT IV 300V and CAT III 500V overvoltage Temperature Range for Operation: 0 to 40˚C
Storage: -10 to 60˚C At 31˚C, operating humidity ranges from 80% to 50%. Observance of SafetyPerformance Standard BSEN 61557-1:2007 BSEN 61557-3:2007 EMC Compliance BSEN 61010-2-030:2010 BSEN 61326-2-2:2013

Digital testing of earth loop impedance with high current and high resolution Loop No Trip technology with anti-trip loops To measure system loop impedance (Zs), use the L-E test. Loop To measure the external loop impedance (Ze), use the high current L-E test. A circuit without an RCD can be tested using the High Resolution L-E/L-N test to determine Zs and Ze. Real impedance method for precise Results of Prospective Fault Current Determine the potential short circuit between the active conductors. A polarity test pad including a red LED hands-free feature and an audible warning tone Backlit LCD display with adjustable brightness for use in a variety of settings Turn Off Automatically rubber boot casing for protection Interface tactile shielded from unintentional phase-to-phase connections 500V CAT III and 300V CAT IV