For ease of use, the Martindale E-Ze CheckTM Pro Kit comes with a specially made carry case. It can be tested at terminals, distribution boards, and light fixtures thanks to its Martindale TL88 3-way fused leads with croc clips and interchangeable 3-pin adaptor for the IEC socket. It has a multipurpose housing and the same technology as the EZ150. For use on lighting circuits or bare wires, this housing allows you to connect either an adaptor with a mains plug or 1 with 3-way flying leads.
- Operating voltage nominal: 230 V
50 Hz is the frequency.
Ranges of non-trip Earth loop impedance: 0-1.7-5-10-100-200-500 O
Accuracy of earth loop threshold: ±(10% + 0.3 O)
<
- 195 V is the voltage low indication.
Warning of high voltage: >
- 270 V
Indicator of open earth: >
- 500 O
Size: approximately 65 x 65 x 50 mm
- weight: approximately 64 g
Energy source: the mains
Power usage: less than 1.6 W
Category of overvoltage: Cat II / 300 V
Degree of pollution: 2.
- Croc clips and E-ZE Check Xtra TL88 fused leads.
Protective plastic case for the mains lead with a carry handle
